Programming
Service Instructions 755 A/756 A - 00.0 - 02/2019 293
To activate a pocket program in an active seam sequence:
1. Press the desired pocket program in the sequence (1) shown on the
pocket program display.
The selected pocket program (2) is highlighted in orange.
The machine always sews using the selected pocket program.
Activating the automatic seam sequence
If the automatic seam sequence is activated, the machine will
automatically sew the next pocket program in the sequence after
completing the current pocket program.
Fig. 280: Activating the automatic seam sequence
To activate the automatic seam sequence:
1. Press the button.
The start screen shows arrows between the seam sequences.
The arrows indicate that the automatic seam sequence has been
activated.
To Next Page
Loading...
