Programming
306 Service Instructions 755 A/756 A - 00.0 - 02/2019
Activating the flap
The display switches to Flap scan.
Fig. 288: Activating the flap (1)
To activate the flap:
1. Press the desired button.
2. Enter the desired value using the numeric keypad.
3. Confirm with OK.
Symbols Meaning
Activate fixed seam length
• manual working method
• Set sewing length
Not available unless Activate sewing length has been selected
• 20 mm - 180 mm/200 mm/220 mm/240 mm (depending on the
sewing length set)
Activate flap scan with 1 light barrier
• semi-automatic working method
• Set maximum flap length
Not available unless Activate flap scan has been
selected ( p. 353)
• 20 mm - 185 mm/205 mm/225 mm/245 mm (depending on the flap
length set)
Activate automatic flap scan left ( p. 353)
• fully automatic working method
To Next Page
Loading...
