Programming
Service Instructions 755 A/756 A - 00.0 - 02/2019 351
To set the machine configuration:
1. Press the desired button.
 The user interface for setting the desired item is displayed.
Selecting working method
The display switches to Select machine class:
Fig. 324: Select machine class
To select the machine class and the matching seam length:
1. Select the desired class (1).
2. Select the desired working method (2).
3. Select the desired maximal seam length (3).
Additional thread tension On/Off
Kit Shims On/Off
Adjustable transport clamp pressure On/Off
Symbol Description
(1) - Class
(2) - Working method
(3) - Maximal seam length
To Next Page
Loading...
Need help?
General
