Programming
Service Instructions 867-M PREMIUM - 02.0 - 02/2017 101
20 Programming
This chapter deals exclusively with content on the Technician level. For a
description of how to create programs or how to make changes to the sew-
ing parameters, the programming on the Operator level is explained in the
Operating Instructions 867-M PREMIUM.
20.1 Calling up the Technician level
A password is requested to make it possible to make changes on the
Technician level.
To access the Technician level:
1. Switch on the machine.
2. Press the P and S buttons at the same time.
The display shows the input screen for the password:
Fig. 89: Password input screen
3. Use the numeric buttons to enter the password (25483).
You are on the Technician level:
20.2 Structure of the software
After the Technician level opens, the display shows the menu items for the
protected area. The following table lists the menu items and gives a brief
explanation.
Submenu Description Reference
ParameterCall Parameter selection
(visible only when activated)
p. 102
Default Program Program presettings p. 103
Machine config. Machine configuration p. 106
User config. User configuration p. 118
Service Service p. 126
Counter Counter p. 133
Reset Reset data p. 133
Data Transfer Data transfer p. 134
1.9
51
Code
To Next Page
Loading...
Need help?
General
