DURKOPP ADLER 867-M Premium - Setting the Contrast (Contrast) Parameter; Setting the Brightness (Brightness) Parameter

Programming
Service Instructions 867-M PREMIUM - 02.0 - 02/2017 125
20.6.9 Setting the Contrast (Contrast) parameter
Set the contrast of the OP3000 to the user's needs here.
To set the parameter:
1. Select the Contrast parameter.
2. Press the OK button to confirm the selection.
3. Enter the desired value (010 – 255).
4. Press the OK button to confirm the value.
20.6.10 Setting the Brightness (Brightness) parameter
Set the brightness of the OP3000 to the user's needs here.
To set the parameter:
1. Select the Brightness parameter.
2. Press the OK button to confirm the selection.
3. Enter the desired value (000 – 255).
4. Press the OK button to confirm the value.