DURKOPP ADLER 867-M Premium - Service (Service) Submenu; Setting the Multitest (Multitest) Parameter

Programming
126 Service Instructions 867-M PREMIUM - 02.0 - 02/2017
20.7 Service (Service) submenu
Make technical settings here, so that the machine runs without any prob-
lems. The parameters are explained in more detail in the subchapters.
The menu is divided into the following submenus:
20.7.1 Setting the Multitest (Multitest) parameter
This parameter makes it possible to test whether, for example, magnets,
drives, and inputs or outputs are functioning correctly.  Parameter
Sheet 867-M PREMIUM lists the necessary allocations.
Test Output subitem
Test of the outputs according to the interconnection diagram.
To test the outputs:
1. Select the desired output with the
/ buttons.
Fig. 93: Test Output subitem
2. Press the OK button to activate/deactivate the selected output.
Parameter Explanation Reference
Multi-test Multi-test  p. 126
Adjustments Service routine  p. 130
Calibration Calibration  p. 130
Subitem Explanation Reference
Test Output Test of the outputs  p. 126
Test PWM Test of the pulse width modulation  p. 127
Test Input Test of the inputs  p. 127
Test Ana. Input Test of the analog inputs  p. 128
Test Auto Input Test of the inputs  p. 128
Test Sew. Motor Test of the sewing motor  p. 128
Test Step. Motor Test of the stepper motors  p. 129
Test Pedal Test of the analog pedal  p. 130
Test Fabric Sen. Test of the material thickness detection (sensing)  p. 130
Output :
Value :
ON(1)
22