DURKOPP ADLER 867-M Premium Service Instruction

Programming
104 Service Instructions 867-M PREMIUM - 02.0 - 02/2017
20.4.2 Setting the foot pressure (Foot Press.) parameter
Foot pressure that should be set as standard when creating a new program.
To set the foot pressure parameter:
1. Select the Foot Press parameter.
2. Press the OK button to confirm the selection.
3. Enter the desired value (01 - 20).
4. Press the OK button to confirm the value.
20.4.3 Setting the needle thread tension (Thr.Tens.) parameter
Needle thread tension that should be set as standard when creating a new
program.
To set the needle thread tension parameter:
1. Select the Thr.Tens. parameter.
2. Press the OK button to confirm the selection.
3. Enter the desired value (01 – 99 %).
4. Press the OK button to confirm the value.
Information
The menu is expanded for 2-needle machines. It is then possible to set the
needle thread tension for the right and left sides.
20.4.4 Setting the sewing foot stroke (Foot Stroke) parameter
Sewing foot stroke that should be set as standard when creating a new
program.
To set the sewing foot stroke parameter:
1. Select the Foot Stroke parameter.
2. Press the OK button to confirm the selection.
3. Enter the desired value (0.5 - 9.0).
4. Press the OK button to confirm the value.

DURKOPP ADLER 867-M Premium Specifications

General

Brand	DURKOPP ADLER
Model	867-M Premium
Category	Sewing Machine
Language	English