DURKOPP ADLER 867-M Premium Service Instruction

Programming
Service Instructions 867-M PREMIUM - 02.0 - 02/2017 103
20.4 Program presettings (Default Program) submenu
Customer-specific settings can be made here, which are automatically
used as preset values for the first seam section during the creation of a
new program. Select the values so that they can be retained for as many
programs as possible.
The menu is divided into the following submenus:
20.4.1 Setting the stitch length (Stitchlen.) parameter
Stitch length that should be set as standard when creating a new program.
To set the stitch length parameter:
1. Select the Stitchlen. parameter.
2. Press the OK button to confirm the selection.
3. Enter the desired value (00.0 - 12.0 rpm).
4. Press the OK button to confirm the value.
Parameter Explanation Reference
Stitchlen. Stitch length  p. 103
Foot Press. Foot pressure  p. 104
Thr.Tens. Needle thread tension  p. 104
Foot Stroke Sewing foot stroke  p. 104
Start Tack Start bartack  p. 105
End Tack End bartack  p. 105
Thread Trim Thread cutter  p. 105
DailyPieces Daily piece counter  p. 105
NOTICE
Property damage may occur!
The machine and the sewing equipment may be damaged.
ALWAYS adjust the stitch length to the selected sewing equipment.

DURKOPP ADLER 867-M Premium Specifications

General

Brand	DURKOPP ADLER
Model	867-M Premium
Category	Sewing Machine
Language	English