Dynisco UPR700 User Manual

12
Device Address: From 1 to 255
NOTE: The physical interface can only support up to 31 devices for each segment. Use multiple
segments for more than 31 devices.
Baud Rate: 600 up to 19200 baud.
Format: 1 start bit, 8 bits with/without parity. 1 stop bit
Parity: Even/Odd.
2.10 MAIN ANALOG OUTPUT SPECIFICATION
Main Analog Output: Opto-isolated from CPU input and output circuits.
Type of Output Function: Keyboard selectable as:
• Primary input retransmission
• Secondary input retransmission
Type of Analog Output: Jumper and keyboard selectable between:
• +0/10 VDC min. load 5 K⍀, with under/over range capability from -2.5 to 12.5 V.
• -10/+10 VDC mm. load 5 K⍀, with under / over range capability from -12.5 to 12.5 V.
• +0/5 VDC mm. load 5 K⍀, with under / over range capability from -1.25 to 6.25 V.
• +0/20 mA max. load 500⍀, with under / over range capability from -5 to 25 mA (max. load
400⍀ over 20 mA).
• -4/20 mA max. load 500⍀, with under / over range capability from 0 to 24 mA (max. load 400⍀
over 20 mA).
2.11 SECOND ANALOG OUTPUT SPECIFICATION
Second Analog Output: Opto-isolated from CPU input and output circuits.
Type of Output Function: Keyboard selectable as
• Primary input retransmission
• Secondary input retransmission
Type of Analog Output: Jumper and keyboard selectable between:
• +0/10 VDC min. load 5 K⍀, with under/over range capability from -2.5 to 12.5 V.
• +0/5 VDC min. load 5 K⍀, with under/over range capability from -1.25 to 6.25 V.
• +0/20 mA max. load 500⍀, with under/over range capability from 0 to 24 mA (max. load 400⍀
over 20 mA).
• +4/20 mA max. load 500⍀, with under/over range capability from 0 to 24 mA (max. load 400⍀
over 20 mA).

Dynisco UPR700 Specifications

General

Brand	Dynisco
Model	UPR700
Category	Computer Hardware
Language	English