UPR700 Microprocessor-Based Pressure/Process Indicator 7
Instruments with the suffix - A3 after the model number have the optional third alarm.
2. SPECIFICATIONS
2.1 MECHANICAL SPECIFICATIONS
Case: Polycarbonate Black color Self-extinguishing degree VO according to UL 94
Front Panel: Designed and tested for 1P65 and NEMA 4X for indoor location
Installation: Panel mounting
Rear Terminal Block: 34 screw terminals with rear safety cover
2.2 MAIN POWER SUPPLY & ENVIRONMENTAL SPECIFICATION
Main Power Supply: From 100 to 240 VAC (-15% to 10%), 50/60 Hz switching. Option: 24 V AC/DC
(-10% to 10%)
Power Consumption: Max 22 VA at 50 Hz; Max 27 VA at 60 Hz
Insulation Resistance: 100 M⍀ @500 VDC
Dielectric Strength: 2300V rms for 1 min, (according to EN61010-1 + A2)
Ambient Temperature: From 0 to 50°C
Storage Temperature: From -20 to 70°C
Humidity: Max 85% RH non-condensing
Watchdog: Hw/Sw is provided for automatic restart
Protection: Two internal dipswitches for factory calibration and security codes protection
Agency Approvals: UL, cUL pending
Self-Certification: CE
Electromagnetic Compatibility and Safety Requirements: The instrument is marked CE. Therefore, it
conforms to council directives 89/336/EEC (reference harmonized standard EN50081-2 and
EN50082-2) and to council directives 73/23/EEC and 93/68/ EEC (reference harmonized standard
EN61010-1).
To Next Page
Loading...
Need help?
General