66
related to level A, level B and level C are always unlocked).
1 means no security code (all parameters related to level C are always locked). A number from 501
to 1000 is the code for level C protection.
NOTE: When complete, return dip switches to operating mode. Once security codes are selected,
their values cannot be displayed again but the display shows On. If the codes are forgotten,
new values should be chosen, using the above procedure. It is recommended that a code be
set for each security level. Note that unlocking the Level C code unlocks Levels A, B and C.
Unlocking Level B unlocks Levels B and A. Unlocking Level A only Unlocks Level A. When
the SECUR functions are accessed in Group 1, the levels that are locked will be followed by
a decimal point. E.g. A.b.C. indicates that all the levels are locked.
13. REPAIR
Questions concerning warranty, repair cost, delivery, and requests for a RA# should be directed to
the Dynisco Repair Department, 508-541-9400 or email: repair@dynisco.com. Please call for a
return authorization number (RA#) before returning any product. Damaged products should be
returned to:
DYNISCO LLC
Attn: RA # _______________
38 Forge Parkway
Franklin, MA 02038
For technical assistance please call 800-221-2201 or 508-541-9400 or fax 508-541-9436.
14. WARRANTY
This Dynisco product is warranted under terms and conditions set forth in the Dynisco Web Pages.
Go to www.dynisco.com and click on “Warranty” at the bottom of any page for complete details.
To Next Page
Loading...