50 Eaton BladeUPS 5 kVA to 60 kVA (N+1) User’s Guide 164201649—Rev 14
Figure 36. Installing the EBM Mounting Brackets
Mounting
Bracket
6-32 Flat-Head
Screws
10. Slide the EBM into the rack.
11. Secure the front of the EBM to the rack using two hex-head screws in each mounting bracket as shown in
Figure 37 .
Figure 37. Securing the EBM Mounting Brackets
12. Attach the rear hold-down brackets to the rail and slide the brackets into the slots on the EBM rear panel. (
see Figure 38 ).
Rack Setup for the EBM
To Next Page
Loading...
