NZM-XDMI-DPV1
(PROFIBUS-DPV1 Interface for
DMI)
142
11/04 MN01219002Z-EN
Circuit-breaker device identification object
This object contains the device identification of the
connected circuit-breaker (ASCII string).
This object is a read only object. It can be accessed by class 1
and/or a class 2 DPV1 master.
Intended usage
Use this object in order to get informed about the circuit-
breaker device identification currently in use
•NZM frame size,
•NZM type,
• number of poles,
• rated current,
• neutral pole protection,
• serial number,
• current transformer type,
• Firmware version,
• type, hardware version and firmware version of a plug-in
module.
Addressing and length of the object
Please use the following information for addressing of the
object:
• API is equal to 0 (only required for class 2 DPV1 master),
• Slot number is equal to 0,
• The index is equal to 15.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
