75
11/04 MN01219002Z-EN
3 NZM-XDMI-DPV1
(PROFIBUS-DPV1 Interface for
DMI)
This chapter describes the transfer of data between the
circuit-breaker, DMI and a higher-level master via
PROFIBUS-DPV1. The NZM-XDMI-DPV1 is used as an
interface here.
System overview The NZM-XDMI-DPV1 communicates as a slave within a
PROFIBUS-DPV1 system with the following higher-level
masters:
• a class 1 DPV0 master or a class 1 DPV1 master, e.g.
programmable logic controller (PLC) and/or
• up to two class 2 DPV1 masters, e.g. control system, PC
with FDT (field device tool) based parameter setting
software, visualisation.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
