PROFIBUS-DPV1 functions
181
11/04 MN01219002Z-EN
Table 53: Address location and meaning of the object data
content
Variable access
(example)
Data position Meaning
Object_A. Octet 1
LS_DMI_Com_Status[1] Bit 0 Circuit-breaker with new serial number
recognized and stop mode active
LS_DMI_Com_Status[2]
Bit 1 Parameters differ in the DMI and circuit-
breaker
Bit 2 to Bit 4 Not used
LS_DMI_Com_Status[6] Bit 5 After initialization of the interface until a CB-
identity (circuit breaker identity) or PC identity
have been recognized when a connection is
being established.
LS_DMI_Com_Status[7]
Bit 6 After initialization of the interface until an
identity block has been correctly received
when a connection is being established
LS_DMI_Com_Status[8]
Bit 7 After initialization of the interface until the
first transfer command has been correctly
received when a connection is being
established
Octet 2
Bit 0 to Bit 7 Not used
Octet 3
DMI_Input_outputs[1] Bit 0 State I0
DMI_Input_outputs[2]
Bit 1 State I1
DMI_Input_outputs[3] Bit 2 State I2
DMI_Input_outputs[4] Bit 3 State I3
DMI_Input_outputs[5] Bit 4 State I4
DMI_Input_outputs[6] Bit 5 State I5
Bit 6 and Bit 7 Not used
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
