EasyManua.ls Logo

Eaton Power Xpert C445 - Page 250

Eaton Power Xpert C445
436 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Appendix COptional Communication Cards
236 Power Xpert C445 Global Motor Management Relay MN042003EN—January 2019 www.eaton.com
Output Instance Output Instance 124 (0x7C): Basic Starter Relay with Extended Analog and Digital Outputs
Length = 18 Bytes
Byte
Offset
Size
(bytes) Name Description
0 2 Basic Starter with
Analog and Digital
Outputs
Vendor specific Basic starter
Bit 0 = Run1
Bit 1 = Run2
Bit 2 = Reserved
Bit 3 = Fault Reset
Bits 4 to 15 = Reserved
2 2 Digital Outputs Bits 0-7 = Outputs for the first digital output card
Bits 8-15 = Outputs for the second digital output card
4 2 Digital Outputs Bits 0-7 = Outputs for the third digital output card
Bits 8-15 = Outputs for the fourth digital output card
6 12 Analog Outputs 6 Output words of data for 6 analog outputs
Output Instance 125 (0x7D):Basic Output Control with Analog and Digital Outputs
Length = 14 Bytes
Byte
Offset
Size
(bytes) Name Description
0 2 Basic Output Control
With Analog and
Digital Outputs
Basic Output Control
Bit 0 = Output#1
Bit 1 = Output #2
Bit 2 = Output #3
Bit 3 = Fault Reset
Bit 4 = Reserved
Bit 5 = Test Trip
Bits 6 to 15 = Reserved
2 2 Digital Outputs Bits 0-7 = Outputs for the first digital output card
Bits 8-15 = Outputs for the second digital output card
4 2 Digital Outputs Bits 0-7 = Outputs for the third digital output card
Bits 8-15 = Outputs for the fourth digital output card
6 8 Analog Outputs 4 Output words of data for 4 analog outputs
Output Instance 126 (0x7E): Basic Output Control with Extended Analog and Digital Outputs
Length = 26 Bytes
Byte
Offset
Size
(bytes) Name Description
0 2 Basic Output Control
With Extended Analog
and Digital Outputs
Bit 0 = Output#1
Bit 1 = Output #2
Bit 2 = Output #3
Bit 3 = Fault Reset
Bit 4 = Reserved
Bit 5 = Test Trip
Bits 6 to 15 = Reserved
2 2 Digital Outputs Bits 0-7 = Outputs for the first digital output card
Bits 8-15 = Outputs for the second digital output card
4 2 Digital Outputs Bits 0-7 = Outputs for the third digital output card
Bits 8-15 = Outputs for the fourth digital output card

Table of Contents

Other manuals for Eaton Power Xpert C445

Related product manuals