EasyManua.ls Logo

Eaton Power Xpert C445 - Page 426

Eaton Power Xpert C445
436 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Appendix D—Modbus Register Map
412 Power Xpert C445 Global Motor Management Relay MN042003EN—January 2019 www.eaton.com
6023 Ethernet Port 1 Speed
Actual
UINT16 RO
Enum
Units: Mbs
Actual Ethernet link speed. This parameter is used to verify the data rate
being used on the Ethernet network. It is read only.
6024 Ethernet Port 1 Full Duplex
Enable
BOOL RW NV
Default: 1
Config CRC
Admin Lock
USB Lock
Selects the duplex mode. Only used when Auto-Negotiate is disabled.
True = Full Duplex False = Half Duplex
6025 Ethernet Port 1 Full Duplex
Enabled
BOOL RO Actual duplex mode. This is a read only parameter, indicating the actual
duplex mode on the Ethernet network. True = Full Duplex False = Half
Duplex
6026 Ethernet Port 1
Autonegotiate Enable
BOOL RW NV
Default: 1
Config CRC
Admin Lock
USB Lock
Selects Auto-Negotiation of link speed and duplex. False = Disabled
True = Enabled
6027 Ethernet Port 1
Autonegotiate State
UINT8 RO
Enum
Active state of the Auto-Negotiation behavior. This parameter indicates
the status of auto negotiate on the Ethernet network. This is read only.
6028 Ethernet Port 1 Enable BOOL RW NV
Default: 1
Config CRC
Admin Lock
USB Lock
This parameter is used to disable the Ethernet port. True = Enable Port
False = Disable Port
6029 Ethernet Port 2 Speed
Select
UINT16 RW NV
Default: 100
Enum
Units: Mbs
Config CRC
Admin Lock
USB Lock
Select the Ethernet link speed. Only used when Auto-Negotiate is
disabled.
6030 Ethernet Port 2 Speed
Actual
UINT16 RO
Enum
Units: Mbs
Actual Ethernet link speed. This is a read only parameter.
6031 Ethernet Port 2 Full Duplex
Enable
BOOL RW NV
Default: 1
Config CRC
Admin Lock
USB Lock
Selects the duplex mode. Only used when Auto-Negotiate is disabled.
True = Full Duplex False = Half Duplex
Table 128. C445 Modbus Register Map, continued
Register Name Attribute Description
Value Description
10 10 Mbps
100 100 Mbps
Value Description
0 Link inactive
1 Auto negotiation in progress
2 Auto negotiation failed
3 Auto negotiation of duplex failed (speed ok)
4 Auto negotiation success
5 Auto negotiation disabled
6 Port disabled
Value Description
10 10 Mbps
100 100 Mbps
Value Description
10 10 Mbps
100 100 Mbps

Table of Contents

Other manuals for Eaton Power Xpert C445

Related product manuals