Chapter 4—System Configuration and Commissioning
46 Power Xpert C445 Global Motor Management Relay MN042003EN—January 2019 www.eaton.com
There are many more features offered by this Software Tool that are described in more
detail in the Power Xpert inControl User Manual, publication MN040013EN.
To access a C445 online with this Software Tool, two protocols are supported: Modbus
TCP Ethernet and Modbus Serial. In order to use Ethernet, the optional Ethernet card must
be installed in the C445 Base Control Module. Using Modbus serial can be accomplished
via the optional RS-485 serial port on the Base Control Module or via a Micro USB port on
either the Base Control Module or the optional User Interface module.
The Micro USB ports use a standard USB/Micro USB cable. This cable may be ordered
from Eaton as catalog number: C445XS-USBMICRO.
To access the C445 via the RS-485 serial port, a USB to RS-485 flying leads cable is also
available from Eaton as catalog number: C445XS-USBLEADS.
To Next Page
Loading...
