Eaton PowerXL DA1 - Page 10

0 About this manual
0.3 Writing conventions
6 CANopen for DA1, DC1, DE11 09/16 MN040019EN www.eaton.com
￫
Please follow the installation instructions in the relevant
instruction leaflets.
For DA1 variable frequency drive:
• Instruction leaflet IL04020010Z for devices of sizes FS2 and
FS3 with an IP20 degree of protection
• Instruction leaflet IL04020011Z for devices of sizes FS4 to
FS7 with an IP55 degree of protection
• Instruction leaflet IL04020012Z for the control cabinet
version of devices of size FS8
• Instruction leaflet IL04020015Z for devices of
sizes FS2 and
FS3 with an IP66 degree of protection
For DC1 variable frequency drive:
• Instruction leaflet IL04020009Z for devices with an IP20
degree of protection
• Instruction leaflet IL04020013Z for devices with an IP66
degree of protection
For DE1... variable speed starter:
• Instruction leaflet IL040005ZU
These documents are available as PDF files on the Eaton
Internet website:
http://www.eaton.de/EN/EatonDE/ProdukteundLoesungen/Electrical/
Kundensupport/index.htm
￫ Customer support ￫ Download Center –
Documentation
In the Quick Search box, enter the document number
(“IL04020010Z”, for example). Then click on Search.
￫
This manual is intended as a supplement to the device manuals
(installation manuals) for DA1 and DC1 variable frequency drives
and DE1... variable speed starters.
• MN04020005Z-EN: “PowerXL™ DA1 Variable Frequency
Drives” (Installation Manual)
• MN04020003Z-EN: “PowerXL™ DC1 Variable Frequency
Drives” (Installation Manual)
• MN040011EN: “DE1… – PowerXL™ Variable speed starter
DXE-EXT-SET – Configuration Module”
￫
All the specifications in this manual refer to the hardware and
software versions documented in it.