Eaton PowerXL DA1 - 1.5.2 Degree of protection IP20 (FS8)

4 CANopen communication settings
4.4 Configuration of the control signal terminals
24 CANopen for DA1, DC1, DE11 09/16 MN040019EN www.eaton.com
4.4.2 Control signal terminal configuration for DC1 variable frequency drives
P-12 = 7, 8: CANopen
Table 11: Control signal terminal configuration for DC1
P-15
DI1
(terminal 2)
DI2
(terminal 3)
DI3/AI2
(terminal 4)
DI4/AI1
(terminal 6)
0 START No function No function No function
1 Not permissible
2 Not permissible
3 START Select BUS REF/f-Fix1 EXTFLT No function
4 Not permissible
5 Not permissible
6 START Select BUS REF/AI1 REF EXTFLT AI1 REF
7
START Select BUS REF/DIG REF EXTFLT No function
8 Not permissible
9 Not permissible
10 Not permissible
11 Not permissible
12 Not permissible
13 START No function EXTFLT No function