Eaton PowerXL DA1 - 1.3 Checking the Delivery

0 About this manual
0.4 Abbreviations
8 CANopen for DA1, DC1, DE11 09/16 MN040019EN www.eaton.com
0.4 Abbreviations
The following abbreviations are used in this manual.
Table 1: Abbreviations
0.5 Units of measurement
Every physical dimension included in this manual uses international metric
system units, otherwise known as SI (Système International d’Unités) units.
For the purpose of the equipment's UL certification, some of these
dimensions are accompanied by their equivalents in imperial units.
Table 2: Unit conversion examples
Abbreviation
Meaning
CAN Controller Area Network
COB ID Communication Object Identifier
CONST
Constant variable (read access only)
DS Default settings
EDS Electronic Data Sheets
EMCY Emergency Object
HEX Hexadecimal (base-16 numeral system)
ID Identifier
PC
Personal Computer
PDO Process Data Object
ro Read Only (read access only)
ROM Read Only Memory
rw Read/Write (read/write access)
Rx
Receive
SDO Service Data Object
Tx Transmit
Designation US-American
value
US-American
designation
SI value Conversion value
Length 1 in (’’) inch 25.4 mm 0.0394
Performance 1HP=1.014PS horsepower 0.7457 kW 1.341
Torque 1 lbf in pound-force inches 0.113 Nm 8.851
temperature 1°F (T
F
) Fahrenheit -17.222 °C (T
C
) T
F
=T
C
×9/5+32
Rotational
speed
1rpm Revolutions per minute 1min
-1
1
Weigh
1lb pound 0.4536 kg 2.205
Flow rate 1cfm cubic feet per minute 1.698 m
3
/n 0.5889