5 Application example – CANopen fieldbus connection on DA1 variable frequency drives
5.2 Materials required
70 CANopen for DA1, DC1, DE11 09/16 MN040019EN www.eaton.com
The following input and output addresses will now be available for controlling
the DA1 variable frequency drive via CANopen:
▶ Open the nodes under DA1 (EDS) [VAR].
Now add the DA1_CANopen_V1_xx.lib CAN library:
▶ Double-click on Library Manager, under Resources.
▶ Open the Insert menu and click on Additional Library…
To Next Page
Loading...
