5 Application example – CANopen fieldbus connection on DA1 variable frequency drives
5.2 Materials required
CANopen for DA1, DC1, DE11 09/16 MN040019EN www.eaton.com 73
Creating visualizations
You will now be creating the visualizations.
▶ Click on the bottom Visualizations tab.
In the object tree, you will see a folder called Visualizations.
▶ Right-click on the Visualizations folder and select the Add Object…
option.
The New Visualization dialog window will appear:
▶ Repeat the process an additional two times, making sure to assign the
names below to the visualizations.
Click on OK after entering the name for each one.
1. MAIN_MENU
2. OPERATING
3. PARAMETERS
To Next Page
Loading...
