5 Application example – CANopen fieldbus connection on DA1 variable frequency drives
5.2 Materials required
74 CANopen for DA1, DC1, DE11 09/16 MN040019EN www.eaton.com
You will now need to replace the wildcards for each visualization:
▶ Start by clicking on the OPERATING visualization.
▶ Now double-click on it. The toolbar at the top should expand so that the
Visualization icon is shown.
▶ Click on the Visualization icon and move the cursor to the upper left
corner of the white canvas area. Hold down the left mouse button and
drag it to draw a rectangle with the size you want on the white canvas
area.
▶ A dialog window with a tree will appear. Select Drive_Operating under
Template. The following window opens.
▶ Confirm your entry with OK.
To Next Page
Loading...
