5 Application example – CANopen fieldbus connection on DA1 variable frequency drives
5.2 Materials required
CANopen for DA1, DC1, DE11 09/16 MN040019EN www.eaton.com 75
Replace the wildcards for each visualization by double-clicking on the
visualization area (or right-clicking on the visualization and then clicking on ->
Configure).
▶ Click on the wildcard... button. A dialog window called Replace
wildcards will appear. This dialog window will contain two columns:
Wildcard and Replacement.
▶ Click under the Replacement column to change the focus there and
press the F2 function key. The corresponding field will be unlocked.
▶ Under PLC_PRG…, select CM_FU_DA1-cyclic.
▶ Click on OK.
To Next Page
Loading...
