5 Application example – CANopen fieldbus connection on DA1 variable frequency drives
5.2 Materials required
76 CANopen for DA1, DC1, DE11 09/16 MN040019EN www.eaton.com
▶ Now follow the same steps to select the replacements for the other two
placeholders.
▶ Click on OK each time.
Creating the parameter visualization (replacing the wildcard)
▶ Under the Visualizations node, double-click on PARAMETERS.
▶ Draw a rectangle with the size you want.
▶ In the Select Visualization dialog window, select
ReadWriteParameter.
▶ Confirm with OK.
▶ Double-click on the visualization.
▶ Select a wildcard.
▶ Click under Replacement and press F2; then select the corresponding
option.
To Next Page
Loading...
