5 Application example – CANopen fieldbus connection on DA1 variable frequency drives
5.2 Materials required
78 CANopen for DA1, DC1, DE11 09/16 MN040019EN www.eaton.com
Creating the visualization for the start page
Finally, repeat the steps above for the third visualization (MAIN_MENU).
You can now connect the variable frequency drive to the PC.
▶ Connect the variable frequency drive and the computer to the network.
▶ Switch on the variable frequency drive and PLC.
▶ Configure the PLC‘s communication parameters; load your program onto
the PLC.
You can now start the variable frequency drive with HAND and START (see
visualization).
To Next Page
Loading...
