Eaton PowerXL DH1 Series - Setpoint; Table 170. Monitor - P7.2; Table 171. Basic - P7.3.1

114 POWERXL DH1 SERIES ADJUSTABLE FREQUENCY DRIVES MN040041EN—August 2019 www.eaton.com
Chapter 7—Advanced application parameter
Table 169. Basic Setting — P7.1, continued
Code Parameter Min. Max. Unit Default ID Note
P7.1.5

PID1 Process Unit Min -99999.99 See Par ID 1300 Varies 0.00 1298
P7.1.6

PID1 Process Unit Max See Par ID 1298 99999.99 Varies 100.00 1300
P7.1.7

PID1 Process Unit Decimal 0 4 2 1302
P7.1.8

PID1 Error Inversion 0 1303 See Par ID 181
P7.1.9

PID1 Dead Band 0.00 99999.99 Varies 0.00 1304
P7.1.10

PID1 Dead Band Delay 0.00 320.00 s 0.00 1306
P7.1.11

PID1 Ramp Time 0.00 300.00 s 0.00 1311
Table 170. Monitor — P7.2
Code Parameter Min. Max. Unit Default ID Note
P7.2.1 FB PID1 Set Point 1 See Par ID 1298 See Par ID 1300 Varies 2542
P7.2.2 FB PID1 Set Point 2 See Par ID 1298 See Par ID 1300 Varies 2544
P7.2.3 FB PID1 Feedback 1 % 2550
P7.2.4 FB PID1 Feedback 2 % 2551
P7.2.5 FB PID1 Feedforward 1 % 2554
P7.2.6 FB PID1 Feedforward 2 % 2555
Setpoint
Table 171. Basic — P7.3.1
Code Parameter Min. Max. Unit Default ID Note
P7.3.1.1

PID1 Keypad Set Point 1 See Par ID 1298 See Par ID 1300 Varies 0.00 1307
P7.3.1.2

PID1 Keypad Set Point 2 See Par ID 1298 See Par ID 1300 Varies 0.00 1309
P7.3.1.3

PID1 Wake Up Action 0 2466 0 = Below Wake Up Level
1 = Above Wake Up Level
2 = Below Wake Up Level(PID
ref.) Wake up when below
wakeup level % set in
Para ID 1318 or 1327 from
PID Setpoint.
3 = Above Wake Up Level
(PID ref.) Wake up when
above wakeup level % set
in Para ID 1318 or 1327
from PID Setpoint.
P7.3.1.4 PID1 Sleep Boost Level 2660
P7.3.1.5 PID1 Sleep Boost Max Time 2661
Note:

Parameter value can only be changed after the drive has stopped.

Parameter value will be set to be default when changing macros.