Eaton PowerXL DH1 Series - Table 23. User Defined Output - M8; Table 24. MWH Monitor - M9; Table 25. Multi-Monitoring - M11

35
Chapter 5—Basic application
POWERXL DH1 SERIES ADJUSTABLE FREQUENCY DRIVES MN040041EN—August 2019 www.eaton.com
Table 22. FB Monitor Menu — M5, continued
Code Parameter Min. Max. Unit Default ID Note
M5.5 Standard Status Word 2414 Bit 0 = See PAR ID 2415 (default = Ready)
Bit 1 = See PAR ID 2416 (default = Run)
Bit 2 = See PAR ID 2417 (default = Fault)
Bit 3 = See PAR ID 2418 (default = Fault Invert)
Bit 4 = See PAR ID 2419 (default = Warning)
Bit 5 = See PAR ID 2420 (default = Reversed)
Bit 6 = See PAR ID 2421 (default = At Speed)
Bit 7 = See PAR ID 2422 (default = Zero Frequency)
Bit 8 - 15 = Not Used
M5.6 FB Status Word 2101 Bit 0 = Ready
Bit 1 = Run
Bit 2 = Direction
Bit 3 = Fault
Bit 4 = Warning
Bit 5 = At reference
Bit 6 = Bypass
M5.7 FB Control Word 2001 Bit 0 = Run_Stop
Bit 1 = Forward_Rev
Bit 2 = FaultReset
Bit 3 = FB input data 1
Bit 4 = FB input data 2
Bit 5 = FB input data 3
Bit 6 = FB input data 4
Bit 7 = Bypass
Bit 8 = FB_Ctrl
Bit 9 = FB_Ref
M5.8 FB Speed Reference 2003
Table 23. User Defined Output — M8
Code Parameter Min. Max. Unit Default ID Note
M8.1 Output Varies 2445
M8.2 Reference Varies 2447
Table 24. MWH Monitor — M9
Code Parameter Min. Max. Unit Default ID Note
M9.1 Total MWh Count Mwh 601
M9.2 Total Power Day Count 603
M9.3 Total Power Hr Count 606
M9.4 Trip MWh Count Mwh 604
M9.5 Trip Power Day Count 636
M9.6 Trip Power Hr Count 637
M9.7 Total Run Time Count 2827
M9.8 Number of Starts 2830
M9.9 Trip Run Time Count 2829
Table 25. Multi-Monitoring — M11
Code Parameter Min. Max. Unit Default ID Note
M11.1 Multi-Monitoring 1,2,3 30