Eaton XV300 - Marine Approvals

1. Description
1.11 Marine approvals
1.11 Marine approvals
Obtained type approvals
XV300 multi touch display 7.0" and 10.1" have been granted the required by Det Norsk
Veritas / Germanischer Lloyd (DNV GL)
l DNVGL-CG-0339 type approval, November 2015 edition,
"Environmental test specification for electrical, electronic and programmable equip-
ment and systems"
Certificate No.: TAA00000NC
Location classes
temperature
B - Ambient temperature: 0°C to +55°C
Humidity
B - Relative humidity up to 100 % at all relevant temperatures.
Vibration
A - Bulkheads, beams, deck, bridge, acceleration amplitude: 0.7 g
emc
A* - All locations except bridge and open deck
B* - All locations (including bridge and open deck)
Input
Required protection according to DNV-GL Rules shall be provided upon installation on board
* Filters / Ferrites maybe required to fulfil. See installation restrictions
Installation restrictions
1. Install and commission referring to manuals.
2. Screened communication cables improve EMC behavior
3. PE connection of communication cables improve EMC behavior (e.g. earth-con-
nection kit: EATON ZB4-102-KS1)
Location class
interface
Installation
EMC B
Power supply
Place interference filter
EMC A

No additional installations
Please refer to the following as well → Section "Conditions for Marine approvals",
page 40
26
XV30004/19 MN048017ENwww.eaton.eu