Eaton XV300 - Safety Regulations; Installation, Maintenance, and Disposal Safety; Prerequisites for Proper Operation

2. Safety regulations
2.2 Mandatory requirements, personnel requirements
Make sure that every person who will be working with the XV300, regardless of the life-
cycle stage involved, has read and understood the relevant parts of the documentation
for the XV300.
Additional parts of the documentation and information for the XV300, including the
installation instructions, can be found at the Eaton Download Center - Documentation
and at the product pages on the Internet
http://www.eaton.eu/doc
http://www.eaton.eu/xv300
WARNING
Incomplete operator manual copies
Working with individual pages taken out from the operator manual
may lead to bodily injury and property damage due to missing safety
information.
Always work with the current and complete documentation.
2.2.4 Installation, maintenance, and disposal
Make sure that the XV300 is connected, installed, serviced, and disposed of pro-
fessionally and in line with all relevant standards and safety rules.
CAUTION
Installation requires qualified electrician
Important!
Dispose of recyclables as required by your local recycling regulations.
HMI panel XV300 no longer being used must be professionally disposed of as per local
standards or returned to the manufacturer or relevant sales department.
2.2.5 Prerequisites for proper operation
In order for the device to be able to meet the contractually stipulated terms, the fol-
lowing must be observed:
l Only qualified personnel should be allowed to work with the XV300.
l The personnel working with the XV300 must have read the manual and must follow
all the instructions in it.
28
XV30004/19 MN048017ENwww.eaton.eu