3.6.4 Quick selecting the message with Arrows Key
or This key is to turn 5 messages at one time to leftward or rightward.
or This key is to turn 1 message at one time upward or downward.
3.6.5 Copying and Pasting the Message
Press key twice, and will be displayed, there are two options in the menu:
and , press key to copy the message needed. Move to the certain
section where you want to put the message, press key twice, and will be
displayed, press key to paste the message and its setting.
3.7 Starting the Printer
Set the printhead and the printing distance, start the conveyor and then press the key to print.
If all the settings are correct, the printing performance will be good.
If the printing is not so good, see “Troubleshooting” and check all the setting.
Contact with your EC-JET Distributor if there is any identified failure.
3.8 Stopping (switching off) the printer
Caution: Never switch off until the printer tells you to do so when it displays “Jet Stopped: You may now
switch off.” Otherwise, it may lead to the print head failure. System should be reset completely if there is
any working failure.
Press key and the printer will initiate the shutdown sequence, which takes approximately 3
minutes. While the machine is shutting down, the following message will be displayed in the status line:
“Stopping Jet：Please Wait”
Wait for the system to carry out its shutdown functions, which among other things, includes cleaning the
nozzle of the print head.
When the printer has finished the shutdown sequence, the following message will appear in the statue
line of the screen:
To Next Page