Guangzhou EC-PACK Packaging Equipment Co., Ltd.
EC-JET 1000Pro Continuous Inkjet Printer
3.07 Print Head Cover Off
3.08 Print Head Not Fitted
3.09 New Print Head Fitted
3.10 Charge Calibration Range
3.11 Safety Override Detected
3.12 Low Pressure
3.13 Modulation"
3.14 Over Speed
3.15 Default Language
3.16 Memory Failure
3.17 Memory Corrupt
3.18 Not Storing Message In Memory
9.3 System failures
System failures occur when the software detects a condition which prevents normal printer operation.
WARNING: LETHAL VOLTAGE. UNKNOWN HIGH VOLTAGES MAY BE PRESENT
WITH SOME SYSTEM FAILURES. DO NOT TAMPER WITH THE PRINTER OR
PRINTHEAD. WAIT UNTIL THE FAILURE SHUTDOWN IS COMPLETE.
These prevent normal printer operation. Contact with EC-JET distributor when necessary.
9.3.1 Print Failures
These occur when the software detects a problem which affects printing.
When a Print Failure occurs, a message is displayed on the screen status line and a jet shutdown
sequence is started.
The internal alarm buzzer is switched on, the ‘print ready’ line set low and the alarm relay is activated (if
enabled).
The keyboard is inactive while the shutdown is taking place.
When the shutdown sequence is complete the Print Failure screen is displayed:
To Next Page
Loading...