EC-PACK EC-JET 1000Pro - Diagnostics and Fault Management; Basic Jet and Print Operations

Guangzhou EC-PACK Packaging Equipment Co., Ltd.
EC-JET 1000Pro Continuous Inkjet Printer
59
7. Diagnostics
There are a large number of diagnostic functions. However, not all functions are valid at all times – some
are only valid when the jet is stopped (e.g. “Clear Nozzle”); some are valid only when the jet is running
and printing is stopped (e.g. “Start Print”), and some are only valid when both the jet and printing have
been started (e.g. “Test Print”).
To keep the size of the diagnostics menu small, and to prohibit the use of functions which are invalid for
the current state of the printer, only valid functions are displayed and are selectable at any given time.
This is in addition to menu variations due to the password level.
Password
Diagnostics menu
Jet stop
Operation
Jet printing
Start Jet
●
—
—
Stop Jet
—
—
Quick Start Jet
●
—
—
Start Print
—
●
—
Stop Print
—
—
●
Test Print
—
—
●
Clear Nozzle
●
—
—
Flush Nozzle
○
○
○
Flush Shut Down
●
●
●
Monitor Jet
●
●
●
System Times
●
●
●
System Configuration Information
●
●
—
Set Pressure
○
○
○
Filter Purge
●
—
—
Real-Time Switch or Edit Message
○
○
○
7.1 Start Jet
Attempts to start the jet but does not start printing.
The following message will be displayed while starting the jet:
“Starting Jet : Please Wait”