To Next Page

To Previous Page

Version 2.02 15.05.2007 Menu Structure of VS 3000

106

Messages POS: XXXXX Entry Default / Dimension

NT LT Dim.

Meas. error tod X Outdoor temperature measuring loop error -, 0..2 2 2 -

Meas. error tr X Room temperature measuring loop error -, 0..2 2 2 -

Meas.err.hunid. X Humidity sensor measuring loop error -, 0..2 2 2 -

Power failure X S tart following power failure -, 0..2 0 0 -

First start X Controller start -, 0..2 2 2 -

Burst disc X Bursting disk input actuated -, 0..2 - - -

External alarm X External alarm input actuated -, 0..2 - 2 -

I/O module error X SIOX I/O module failure -, 0..2 1 1 -

Service mode X Service mode activated -, 0..2 0 0 -

Comp/cond unload X External unload activated -, 0..2 0 0 -

Load shed X Compressor disabled by load shedding -, 0..2 0 0 -

Low liq. level X Low liquid level cutout tripped -, 0..2 2 2 -

RAM error X Internal data memory fault -, 0..2 1 1 -

EEPROM error X EEPROM (parameter memory) fault -, 0..2 2 2 -

RTC error X Real-time clock fault -, 0..2 2 2 -

Setpoint changed X Setpoint changed -, 0..2 0 0 -

Max. speed F X Threshold value for speed adjuster exceeded. -, 0..2 0 0 -

Battery voltage X Internal battery fault -, 0..2 2 2 -

Manual OFF X Compressor OFF by manual switch -, 0..2 0 0 -

Manual ON X Compressor ON by manual switch -, 0..2 0 0 -

Emerg. working X Emergency operating mode - , 0..2 0 0 -

HP cutout D2D Z1 X High-pressure cutout for discharge gas defrosting

Z1 cases

-, 0..2 2 2 -

HP cutout D2D Z2 X High-pressure cutout for discharge gas defrosting

Z2 cases

-, 0..2 2 2 -

HPcutout D2D Z2R X High-pressure cutout for discharge gas defrosting

Zs coldrooms

-, 0..2 2 2 -

Disable D2D Z1 X Disable discharge gas defrosting Z1 -, 0..2 0 0 -

Disable D2D Z2 X Disable discharge gas defrosting Z2 -, 0..2 0 0 -

Disable D2D Z2R X Disable discharge gas defrosting Z2 coldrooms -, 0..2 0 0 -

Fault D2D Z1 X Discharge gas defrosting fault Z1 -, 0..2 2 2 -

Fault D2D Z2 X Discharge gas defrosting fault Z2 -, 0..2 2 2 -

Fault D2D Z2R X Discharge gas defrosting fault Z2 coldrooms -, 0..2 2 2 -

Sens type change X Sensor matching changed -, 0..2 0 0 -

Comp auto disabl X Automatic compressor disable - , 0..2 2 2 -

too many starts/h X Compressor short-cycling (LP combined control-

ler)

-, 0..2 2 2 -

no load level X No load level received (t0 shift) -, 0..2 2 2 -

Brand	ECKELMANN
Model	VS 3000
Category	Controller
Language	English

ECKELMANN VS 3000 User Manual

Table of Contents

Questions and Answers:

ECKELMANN VS 3000 Specifications

Related product manuals