Risk of slipping due to fluid in the operation and provisioning area!
DANGER!
Slipping hazards are marked by the symbol opposite. If chemical liquids are
spilled, this creates a slipping hazard; they must be cleaned up immediately,
and the materials used must be disposed of professionally and in accordance
with environmental requirements.
ENVIRONMENT!
Immediately soak up any leaking liquids with a suitable binding agent and
dispose of properly.
WARNING!
If necessary, place the product container in a tank.
W
ear non-slip, chemically resistant shoes when working.
Unauthorised access
DANGER!
The owner must ensure that unauthorised personnel are
prevented from accessing the operating area.
Chemical hazards (metering medium/active substance)
DANGER!
Risk of injury to the skin and eyes caused by the chemical used
(metering medium).
Read the enclosed safety data sheet carefully before using the metering
medium.
The safety regulations and the required protective clothing when working with
chemicals must be complied with.
ENVIRONMENT!
Leaked, spilled metering media may be harmful to the environment.
Leaked, spilled metering media must be cleaned and disposed of correctly,
according to the instructions on the safety data sheet.
It is essential to ensure
that the required personal protective equipment is used.
DANGER!
It is imperative to wash your hands before taking a break and at the end of
your shift. Information about the usual precautions when handling chemicals
and about the use of PPE can be found on the relevant safety data sheet for
the chemical being used and they must be complied with.
Safety
Explanation of the safety symbols used > Indications of risks
19 Rev. 02-09.2017
To Next Page
Loading...
