10.8.3 [General parameters] - [Unit Meter]
In [General parameters] -
[Unit Meter] can be used to set how many units
(bottles or crates) per pulse are to be recorded.
Fig. 43: [General parameters] - [Unit Meter]
1 Setting the units per pulse for plant 1. 2 Setting the units per pulse for plant 2.
1.
In the „home screen“
Ä
Chapter 10.3 „„home screen“ (start screen)“ on page 54
use the
button to switch to the general parameters.
ð
The overview: „Parameters: General“ is displayed.
Ä
Chapter 10.8.1 „[General parameters]“ on page 73
2. Press button [Unit counter] .
ð
The overview: „Parameter: Units“ is displayed.
10.9 [Messages]
The menu option
[Messages] displays error messages.
Fig. 44: Messages
1.
In the „home screen“
Ä
Chapter 10.3 „„home screen“ (start screen)“ on page 54
use the
button to switch to the view of the [error messages] .
ð
The overview: „error messages“ is displayed.
This overview only displays active, unacknowledged error messages.
2. Press button [Signal buffer] .
ð
The overview: „Signal buffer“ is displayed.
This overview displays ALL error messages ever recorded by the
system, including those already displayed and the open messages.
Layout of the software display
Messages
76Rev. 02-09.2017
To Next Page
Loading...
