EasyManua.ls Logo

Ecolab DryExxEco Advanced-ETH - Indications of Risks

Ecolab DryExxEco Advanced-ETH
196 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2.8.2 Indications of risks
Risk due to electrical energy
DANGER!
Risk of fatal injury from electric current!
Contact with live parts represents immediate danger to life due to electrocution.
Damage to the insulation or individual components can be life-threatening.
Before starting work, create a de-energised state and ensure this state for
the duration of the work.
W
ork on electrical components may only be carried out by professional
electricians.
Turn off immediately and organise repairs if there is any damage to the
insulation voltage supply.
Never bridge or decommission fuses.
When replacing fuses, observe the correct rating.
Keep voltage-carrying parts away from moisture, as this can cause a short
circuit.
DANGER!
Electrical hazards are marked by the symbol opposite. Work on those places
may only be carried out by skilled personnel who are duly trained and
authorised.
NOTICE!
The protective earth connection is marked by one of
these symbols at the connection points.
Risk of fire
DANGER!
If there is a risk of fire, it is imperative to use the designated extinguishing
agent and to implement suitable safety measures to tackle the fire. It is also
imperative here to comply with the safety data sheet for the chemicals you use
to tackle the fire!
Safety
Explanation of the safety symbols used > Indications of risks
18Rev. 02-09.2017

Table of Contents

Related product manuals