4 Assembly
4.1
Lubo-DryExx applicator station
®
Details on the identification of the applicator station can be found on the
type plate
The type plate is located on the right-hand side of the housing. The details on
the type plate are described in
Ä
Chapter 14.3 „Type plates“ on page 90 in
more detail.
4.1.1 Type 182830 - Mit ALMATEC compressed air diaphragm pump
Fig. 2: Lubo-DryExx assembly
®
with ALMATEC compressed air diaphragm pump
1
Consumer connection, R 3/4"
2 3/2 way solenoid valve, pilot valve
3 2/2 way diaphragm valve, pneumatic actuation
4 Return connection for hose 12/21
5 Product connection, pressure side
6 Product connection, intake side (via suction lance)
7 ALMATEC compressed air diaphragm pump
8 Compressed air connection, applicator pump
9 Compressed air filter regulator
10 Compressed air connection, 8/6
11 FESTO compressed air dosing unit
12 3/2 way solenoid valve, control valve of the pump
13 Lock of the protective housing
Assembly
Lubo-DryExx applicator station® > Type 182830 - Mit ALMA
TEC compressed air diaphragm pump
25 Rev. 02-09.2017
To Next Page
Loading...
