EDAN F9 - Changing the Language; Changing FHR Algorithm

F9 Fetal & maternal Monitor Service Manual System Configuration
- 19 -
CAUTION
To avoid inconsistency between FHR traces on the recorder paper and those on the
screen, the paper style must comply with the style of the recorder paper being used.
5.13 Changing the Language
The software supports several languages.
1 Open the System Setup menu.
2 Select Language.
3 Select the required language.
4 Select OK.
5.14 Changing FHR Algorithm
The Beat-to-beat FHR algorithm provides vivid short-term variation information of the fetal
heart rate. The Average FHR algorithm provides a smoothened FHR trace.
1 Open the System Setup menu.
2 Select FHR Algorithm.
3 Select Beat-to-beat or Average.
4 Select OK.