EDAN iM3 - Replacing the Adapter Board of Recorder

Vital Signs Monitor Service Manual Disassembling the Monitor
- 61 -
○
1
Screws
○
2
Wires linking iM series interface
board and recorder
Install external plug-in sensor board:
Install the sensor board in the reverse order, fix the water tray and fix the external plug-in
assembly.
8.6.6 Replacing the Adapter Board of Recorder
○
1
Screws
Install the adapter board of recorder：
Install the adapter board in the reverse order, fix the water tray and fix the external plug-in
assembly.
To get the internal
components of recorder
as step 1 in section 7.6.4
Take the
clasp apart
Replace the
adapter board
Remove the
screws
To get the external
plug-in assembly as
step 1 in section 7.6.3
Remove
wires
Replace external
plug-in sensor
board
Remove
the screws