PREPARING THE COPIER/PRINTER TO CONNECT TO THE E-42B 125
TO INSTALL THE “FIERYDRIVEN®” KEY TOP SEAL ON THE COPIER/PRINTER OPERATION PANEL
• Insert the “fierydriven®” key top seal to the key right above the F2 key.
FIGURE 33: Inserting the key top seal.
TO AFFIX THE FIERY DECAL ON THE COPIER/PRINTER FRONT COVER
• Affix the Fiery decal on the copier/printer front cover.
FIGURE 34: Affixing the decal on the copier/printer.
To Next Page
Loading...
