USING THE E-42B 26
E-42B control panel Functions menu
The following options are available from the E-42B Functions menu:
•
MB Replacement: Allows you to transfer any options stored in the hard disk drive of the
E-42B into a new motherboard.
NOTE: The MB Replacement option appears only when you insert the motherboard
replacement dongle into a USB port.
•
Eject CD/DVD: Allows you to eject media from the DVD drive. Media is also automatically
ejected whenever the E-42B is restarted, shut down, or rebooted. A hardware eject button
is also located below the disc slot.
•
IP Address: Displays the current IP address of the E-42B.
•
Restart Server: Includes options to Restart (soft reset) or Reboot (hard reset) the E-42B.
Selecting Restart resets the E-42B server software, but does not reboot the entire system.
Selecting Reboot shuts down all E-42B activity and reboots the system. When you select
Restart or Reboot, network access to the E-42B is temporarily interrupted and all currently
processing jobs are aborted and may be lost.
•
Shut Down Server: Shuts down all E-42B server software and powers off the system. Always
select this option to power off the system.
NOTE: Avoid using the reset button on the front panel, as doing so may cause the system to
operate unpredictably. Use the reset button on the front of the E-42B only if the system is
unresponsive to keyboard or mouse actions.
To Next Page
Loading...
Need help?
General
