EFI E-42B User Manual

141 pages

To Next Page

To Previous Page

REPLACING PARTS 86

8 Print the Test Page and Configuration page.

• If the E-42B does not start up, refer to the startup problems listed on page 110.

• If pages do not print, verify that the interface cables are properly connected (see printing

problems on page 117).

• If image quality is poor, test the copier/printer (see the service documentation that

accompanies the copier/printer).

9 Connect to the network (see page 21).

10 Ask the network administrator to download a test job over the network.

If the job does not print, or has poor image quality, see printing problems and the

Troubleshooting sections of the user documentation.

Questions and Answers:

Need help?

Do you have a question about the EFI E-42B and is the answer not in the manual?

General