Eighteeth Helios 600 - Page 46

Page 46 / 53
The tip is installed but not
Reinstall the tip, and make sure the tip is in firm
detected. No live video is
displayed, and the
Scanner tip is not
detected icon is displayed
at
the bottom-right of the
interface.
contact with the scanner.
Fogging appears on the
inner surface of the lens
window at the base of the
scanner.
Mount a completely dry tip on the scanner, and place
the scanner in the holder or set it on the desk, and wait
until the fogging fades. If the fogging does not disappear
completely after 24 hours, contact your local service
provider for assistance.
Ensure that the tip is thoroughly dry before mounting on
the scanner, and do not use a cloth
soaked in disinfectant to clean the scanner.