Eighteeth Helios 600 - Introduction; Indications for Use; Contraindications; Safety Instructions

Page 8 / 53
3. Introduction
3.1 Indications for Use
The HELIOS 600 is a digital optical scanning device used to record the topographic
characteristics of teeth or dental impressions in three dimensions. The resulting
topographic impressions are intended for use in the computer-aided design and
manufacturing of dental restorative prosthetic devices, dental implant prosthetic
devices, and orthodontic models.
The HELIOS 600 could be used for both adult and children in clinical practice.
The HELIOS 600 is designed to acquire 3D models in the in the followings
 Upper jaw
 Lower jaw
 Buccal bite registration
3.2 Contraindications
Patients with oral mucosal disease, mental illness, severe respiratory disease, asthma,
Parkinson's disease, hyperactivity disease are forbidden.
Patients with moderate or severe opening limitation should use it with caution.
3.3 Safety Instructions
WARNING
Scanner：
 You MUST read and understand this safety information before using the scanner.
 This scanner shall only be used inside hospitals and other professional healthcare facilities
and MUST NOT be used near high frequency surgical equipment and the RF shielded
room of an ME System for magnetic resonance imaging, where the intensity of
electromagnetic disturbance is high.
 Before using the scanner, check the outer surfaces of the unit and any accessories to ensure
there are no rough surfaces, sharp edges, or protrusions which may cause a safety hazard.
 You are responsible for the operation and maintenance of the scanner. You MUST have
training to use the scanner.
 DO NOT place objects within the field of operation of the unit.
 When the unit is not in use, ensure that the scanner is turned OFF.
 DO NOT use the scanner in conjunction with oxygen-rich environments. This unit is not