Page 9 / 53
intended for use with flammable anesthetics or flammable agents.
DO NOT pull or twist the cable.
DO NOT drop the scanner.
DO NOT sterilize the scanner.
DO NOT expose the scanner to water spray or submerge it in water or disinfectant.
DO NOT expose the scanner to high vibrations.
DO NOT expose the scanner to ultraviolet radiation for a long period.
DO NOT stare at the LED emission window.
DO NOT remove the cover of any scanner components. The scanner contains no user-
serviceable parts. For any repairs, contact a qualified Eighteeth service technician.
DO NOT replace the cables provided with the scanner with other cables. Doing so may
damage the scanner and adversely affect the safety protection and EMC performance of
the scanner.
Any other equipment not complying with IEC 60601 shall be kept at least 1.5 meters
away from the patient.
If the equipment is faulty, turn it OFF, display an “Out of Service” notice, and contact
a qualified Eighteeth service technician.
Using components, accessories, cables and spare parts other than those specified or
provided by the manufacturer of this equipment may impair the safety protection of the
scanner and may result in increased electromagnetic emissions or decreased
electromagnetic immunity of this equipment and result in improper operation.
No modification of this equipment is allowed.
Additional multiple outlet strips or extension cords should not be connected to the system.
The maximum temperature of the applied part may reach to 43 °C; to avoid overheating,
do not use it for extended periods.
This equipment contains certain materials and chemical compounds incidental to the
manufacture of electrical and electronic equipment, and improper “end-of-life” disposal
of such equipment can result in environmental contamination. Therefore, this equipment
should not be disposed of as ordinary household waste but should instead be delivered to
a designated electrical and electronic waste disposal or recycling center. For further
information on disposing of electrical and electronic waste, contact the cognizant
authority within the jurisdiction.
Computer
DO NOT place the computer and the peripheral equipment connected to it in the
immediate vicinity of the patient. Leave at least 1.5 meters distance between the patient
and the equipment.
The scanner is only intended to be connected to a computer that is at least IEC 60950 /
IEC 62368, or equivalent standards certified. Connecting the scanner to other equipment
may be hazardous.