MULTIPLY FUNCTION:
In the multiply function the measured frequency
is
multiplied by an integer up to 99. The result is dis-
played to
1
KHz
resolution. If the results of the multiplications are too big for the front panel to display,
the front panel will show F's.
EXAMPLES:
MULT
PRESS
(
AND KEY IN TWO DIGIT NUMBER
MULT
EXAMPLE
(-1
(0)
F]
FOR MULTIPLIER
=
2
NOTE: When "MULT" key is pressed the annunciator "MLT" will flash until the sequence
is
completed.
The two digit multiplier
(m) will be displayed as the numbers are entered.
To clear the multiplier function the following operation
is
performed.
I
MULT CLEAR
MULT
PRESS
0
0
Or
PRESS
DATA
This sequence clears the multiplier function and multiplier (m).
*By using the frequency offsets and multiply functions the counter can automatically perform mX
*
b
calculations.
The equation for the function performed
is:
Displayed Reading
=
mX
*
b where
m
=
Multiplier (up to 99) entered from keyboard.
X
=
Input frequency.
-+
b
=
Frequency offset entered from the keyboard.
TO DO rnX
i
b
CALCULATION FOR rn
=
2,
b
=
-70
MHz
MULT FREQ
OFFSET
Scans by ArtekMedia © 2007
To Next Page
Loading...