Frequency limits can be entered to 10 MHz resolution.
FREQ LlMlT
PRESS:
[
Notice flashing annunciator.
low
PRESS:
Number keys corresponding to desired frequency low limit to 10 MHz resolution.
MHz
PRESS: or
I
10
terminate input sequence. Notice FRQ LMT LOW annunciators
GHZ
solidly lit.
FREQ LlMlT
PRESS:
n
Notice flashing annunciator
high
PRESS:
1#1
Key numbers corresponding to desired freq. Hi limit.
PRESS:
f?
or TO terminate input sequence. Notice FRQ LMT Hi annunciator
solidly lit.
To recall stored limits.
FREQ LIMIT CLEAR FREQ LIMIT CLEAR
PRESS: and
low
El
DISPLAY
and
DISPLAY
To clear data memory and remove frequency limits.
FREQ LIMIT DATA FREQ LIMIT
0
DATA
PRESS:
a
OW
and
CLEAR
0
then
high
and
cLEAR
n
Vary Source. Notice
selected
limit(s) are erased. Also notice "FRO LMT LOW HI" annunciators are out.
NOTE: High and low limits should be separated by at least 100 MHz.
Scans by ArtekMedia © 2007
To Next Page
Loading...