KEYBOARD TEST
TEST
PRESS:
Notice display is 05. Press any key and display will indicate a two digit number showing the position
of
that key within the matrix thus checking keyboard operations. See table 6-10 for coordinates.
TO
EXIT TESTS
CLEAR
PRESS:
[
to exit a test and return to normal operation.
DISPLAY
TO exit tests 1 through
4,
6
and
7
you can press any function key. This will exit the test and enter the
function selected.
Tests
6
through 10 are used for calibration and troubleshooting. See section
6
and
7.
Scans by ArtekMedia © 2007
To Next Page
Loading...